First, the main technical parameters of carbon fiber composite IR+UV baking line
1. Dimensions (approx.): total length 13000* total width 1540* total height 1800mm, product feeding width is 800mm (effective width), feeding height is 650mm adjustable. The feeding area is 2000mm long, the leveling area is 4000mm long, divided into 2 sections, each section is 2000mm, the UV zone is 2500mm long, the discharge zone is 2000mm long, the discharge opening is equipped with blackout curtains, and the UV zone is equipped with a furnace cover before and after the cover. Install a 0.37KW exhaust fan with a filter.
2, UV light source: the use of imported Parma halogen tube; wavelength = 365nm, a total of 6 sets, plane irradiation 4 sets of 9KW + side illumination 2 sets of 5.6KW; using stepless dimming control.
3. Curing method: multi-faceted irradiation;
4. Power source: three-phase five-wire system, 380V, 50HZ;
5, drying temperature range: room temperature -100 ° C adjustable;
6, the total power: about 55KW.
Second, the carbon fiber composite material IR + UV baking line furnace structure characteristics
1. Shell material: It is made of 2mm thick Q235 cold-rolled steel sheet (the best comprehensive strength, plasticity and welding performance) by bending and welding;
2, surface treatment: surface grinding, polishing, phosphating (can increase the corrosion resistance of metal, paint adhesion) treatment; high temperature spray (large corrugated type), can prevent rust, corrosion resistance. The color is "computer gray".
3, UV line chassis: made of stainless steel flat material, to maintain the bearing strength of each surface inside and outside the furnace, can prevent the deformation of the furnace. The bottom layer is sealed to prevent dust from entering;
4. Sealing material: The sealing strip adopts “3M” Arms strip glue, which can effectively block the light and strengthen the sealing effect.
5. Drying and ventilating device: The gas cap and the exhaust port are equipped with regulating valves on the top of the furnace cover. The diameter is Φ90mm, and the air flow can be adjusted to make the temperature inside the furnace more uniform.
6. Transmission part: The conveyor belt adopts 6-point double-pitch stainless steel folding plate conveyor belt. The chain plate is bent with 1.5mm thick stainless steel. The chain plate is fixed on the chain bending plate. It adopts 0.75KW Taiwan Yongkun gear reduction motor with 1P love. Deli inverter, the transmission speed is adjustable from 0.2-9m/min.
7. Move the foot cup: Install the foot cup at the bottom to facilitate the movement and height adjustment of the UV machine.
